Equipment – Products – Technical assistance
ABC SwissTech has developed a comprehensive range of products for the’ EBAVURAGE (abrasives and equipment) ; full technical assistance is also available for the development or improvement of process through his laboratory.
- A range of more than 6500 abrasive or polishing chips (ceramic, Porcelain, plastic, metal…)
- More than 150 liquid compounds, powders and pastes
- Vibrators, centrifugal disk, centrifugal barrel, rotative barrels…
- A testing laboratory at your disposal
ABC SwissTech, based in Switzerland, in La Chaux-de-Fonds, historical cradle of watchmaking and microtechnology, is specialized in two main areas :
Mass finishing – Deburring – Polishing
Water treatment and recycling
TO DEBURR YOUR PARTS, DO YOU WANT TO USE INDUSTRIAL TECHNIQUES, RELIABLE AND REPRODUCIBLE ?
Nous vous proposons un audit gratuit qui vous permettra de vérifier que vous utilisez les produits les mieux adaptés à votre besoin.
Improving Your Deburring Method
Realization of tests in our laboratory
Qualification of parts and measurement of initial and residual burrs
tel. : + 41 (0) 32 930 2950
Eplatures-grise 17, CH-2300 La Chaux-de-Fonds – SWITZERLAND
THE CURRENT SITUATION :
Statistically, 80% deburring operations are carried out on a non-industrial basis.
The cost of these operations is often excessive.
And their reproducibility is insufficient…
SOLUTIONS EXIST :
For simple burrs, l & rsquo; ebavurage tonneau can give excellent results.
It is sometimes also called mechanized deburring or machine deburring..
The simplest method uses a vibrator or one tonneau rotatif  which will set in motion the parts and abrasive media.
If the burrs are more resistant, it will be possible to use rotating bottom centrifuges  or for even more energy, of centrifugal barrel  (straight or oblique axis)
Otherwise, if you want a deburring that preserves the initial surface condition (without making the surfaces matt), the centrifugeuses magnétiques  can constitute a particularly interesting track.
BREAKING OF ORDERS :
Very frequently, the technical specifications of the parts require perfectly controlled edge rounding or breaking of edges. Thereby, on complex parts, it may be required to have edges rounded to a few tenths of a millimeter with a very tight tolerance. Some equipment is very well suited to these objectives and allows to obtain on all the edges of the parts a precise rounding to a few microns.