Mass finishing compounds – soaps
Mass finishing compounds can be liquid, powders or pastes. Mass finishing compounds are chosen based on :
- Application (deburring, polishing, brightening, sand-blasted effect, degreasing, anti-rust protection…)
- The material of the workpieces
- The type of equipment used
- The type of effluent treatment
- Environmental standards to be met
See our .Pdf listing the most common mass finishing compounds :
Their most obvious function is to eg degrease surfaces or protect them from corrosion; but the additives may make the shiny or matt parts.
The least visible function is to ensure a permanent surface both parts and the cleanest possible media.
The page linked to additives will guide you in choosing the right product, but n & rsquo; feel free to ask us to give you a more personalized help ; Indeed, parameters such as the pH of the additives, the capacity of your vibrator or the rotational speeds of your equipment are decisive ...
Finally, some special additives can be considered as doping process ; thus, they can accelerate significantly removing material, This can be of particular interest to print parts from 3D.
We have over 150 other compounds for specific applications; we are at your disposal to identify the product that best suits your needs.
Finally, on the basis of environmental considerations, our chemists can help you to choose the best adapted compound, with the right dosages and especially the best treatment and recycling water system.
List of some of the most common additives :
- ABC PULIB 72 : deburring additive
- ABC PULIB DS100: degreasing additive
- ABC PULIB DP200: additive for passivation
- ABC PULIB 6140 : additive for polishing
- ABC PULIB FHB2: additive for brightening in slightly alkaline medium
- ABC PULIB 11 : additive for brightening in acidic medium
We have over 150 other compounds for specific applications; we are at your disposal to identify the product that best suits your needs.
